An ISO 9001 : 2008 Certified Company
Home about us Product Our Client Contact Us feedback Site Map
Alarm Annunciators, Electronic Components, Process Control Instruments, Industrial Automation System, Microprocessor Based A.C. Controllers, Timers, Preventers, Microcontroller Based A.C. Controllers, Digital Panel Meters, Current Scanners, Digital Temp.Indicators & Controllers, Motor Protection Relays, Custom Built Electronic Equipments, RPM / Frequency Indicators, Line Frequency Meters, AC VoltMeters, AC Ammeter, Voltage Scanner, Humidity Indicators
 
 
Manufacturers of :
 
 Microprocessor Based A.C. Controller
Sensicool Controller
Damper Controller
Cell Site Controller
Microprocessor Based Alarm    Annunciator
Digital Panel Meters
Digital 3-Phase Auto Voltage /    Current
Scanner
Motor Protection Relays
Digital Panel Meter
AC / DC Power Monitor
Line Frequency Meter
AC Voltmeter
Voltage Scanner
Temperature Indicator
A.C. Controller for ATM
Single Phase Preventer 1
Single Phase Preventer 2
Frequency Monitoring Relay
Phase Correction Relay
Digital Temperature Indicators /    Controllers
Winding Protection Rrelay
Phase Selector Relay
Earth Fault Relay
VAF Meters
RPM / Frequency Indicator
AC Ammeter
Three Phase / Single Phase Voltage    Monitor
Process Indicator
Humidity Indicator
Fire Protection Panel
 
 
 
 
 
Voltage Monitoring Relay :
Protection of electrical devices against Over voltage, Under voltage in the supply is one of the major issue in electrical systems.

For safe running of electrical devices, special protections that keep a continuous watch on supply conditions are very essentials.

'PROTONs VMR 1P' offer following protections along with 3 digit display showing

R-N voltage in scanning mode with precise accuracy.
LOW/HIGH voltage tripping to ensure trouble free running of Loads.
Voltage Monitoring Relay
   
 
Voltage Monitoring Relay
 
 
 
SALIENT FEATURES :
•
Microcontroller based technology.
•
Voltage protection along with digital voltage readout.
•
Wide range of supply variation.
•
Protection against Under voltage.
•
Protection against Over voltage.
•
Password Protection for the set point.
•
All the set points setable by keys.
•
Indications for High voltage, Low voltage Relay ON & Timer indication .
•
No separate auxiliary supply required.
 
TECHNICAL SPECIFICATION :
Supply voltage
 100-300 VAC, (No auxilliary supply)
Output Contacts
 Two changeover (N/C-C-N/O),Rating 5A at 230VAC
Voltage trip setting : 240 to 300 V For OV with digital display (resolution of 1 V)
: 0 to 210 V For UV with digital display (resolution of 1 V)
( Hysterisis between cut off & cut in is 10V)
Trip Time delay Trip time for UV :Settable Default : 5 sec. Range: 1 to 60 sec. for OV : Fixed 3 sec.
ON Delay Selectable by keys from 1 to 60 sec.
Reset Mode Auto reset.
Indications TIMER : RED LED
OVER VOLTAGE : RED LED
UNDER VOLTAGE: RED LED
RELAY ON : GREEN LED
Keys [ SET ] FUNCTION key, To select a set point function.
  [ /\ ] INC key, To increment set point.
  [ \/ ] DEC key, To Decrement set point.
Operating Temperature range -5 0C to 60 0C.
Relative Humidity 95%
Mounting Din rail. : Base mounting dimensions
55 (W) x 65 (L) x 125 (D) mm.
 
WORKING :
- In the normal run mode, display shows Phase to Neutral Voltage If there is no UV/OV fault then countdown of ON time for Relay will start on display & timer indication starts blinking & after that Relay will be ON & Phase to Neutral Voltage will be displayed continuously. If Over voltage/Under voltage fault occurs in the supply then Relay will be OFF & corresponding fault LED starts blinking.Hysterisis betwen Cut off & cut in is 10V