Cutout dimensions :- (96 mm X 96 mm) (48mm X 96mm)
WORKING :-
* The digital RPM meter trips after the line
RPM increases above the set point ,which
can be set.
* For ego If the set point is 1500 RPM then if
the line RPM goes above 1500, then the
Meter will trip automatically after trip delay of 5 Sec.
contact point will return to normal position when
line RPM goes below 1495 RPM
i.e (set point - 5)RPM.
* The set point can be changed from set menu.
Set menu is selected after pressing set button.
After entering the set menu green led
will flash. The default set point is 1525.
It can be changed with the help of inc or
dec key. The set point will be saved
after waiting for 10 seconds.
Application :
* Uninterrupted Power Supplies
* Electrical Panels & Test benches
* Genset Panels
* Airconditioning & refrigeration Panels
* Motor Control Equipments
* Distribution Control panels
OUR OTHER PRODUCTS
* Microcontroller for Airconditioners.
* Package AC. controllers.
* Compressor Guards for Window/Split AC.
* Aircon controller upto 6 ACs
* Digital Panel meters.
* Electronic flashers/Timers.
* Alarm annunciators available from 4 to 48 windows.
* Microcontroller based Automatic voltage regulators
for transformer panels.
* Custom built Electronic products.
TECHNICAL SPECIFICATIONS
Aux. Supply
1. 80 TO 280 V AC /DC
2.48 VDC / 12 VDC As per product selection.
Accuracy
+1-1 %
Display
RED Bright seven segment 4 Digit / 3 Digit 0.5",0.8"
segment size available
Indications
Set point Indication: RED LED
Relay ON indication:GREEN LED
ALARM indication : RED LED
Dimensions
96mm X 96mm X 72mm or 96mm X 96 mm X 52 mm
Panel Cut-out
92mm X 92 mm
Mounting
Flush Mounting.
Weight
200 gm TO 300 gm (Depending on the product type)
Output Contact:-
10 AMP. at 230 VAC ( C- NO - NC) Rating
Optional Features :-
Relay contact for Alarm, Inbuilt Buzzer,O.8" display. Operating
