An ISO 9001 : 2008 Certified Company
Home about us Product Our Client Contact Us feedback Site Map
Alarm Annunciators, Electronic Components, Process Control Instruments, Industrial Automation System, Microprocessor Based A.C. Controllers, Timers, Preventers, Microcontroller Based A.C. Controllers, Digital Panel Meters, Current Scanners, Digital Temp.Indicators & Controllers, Motor Protection Relays, Custom Built Electronic Equipments, RPM / Frequency Indicators, Line Frequency Meters, AC VoltMeters, AC Ammeter, Voltage Scanner, Humidity Indicators
 
 
Manufacturers of :
 
 Microprocessor Based A.C. Controller
Sensicool Controller
Damper Controller
Cell Site Controller
Microprocessor Based Alarm    Annunciator
Digital Panel Meters
Digital 3-Phase Auto Voltage /    Current
Scanner
Motor Protection Relays
Digital Panel Meter
AC / DC Power Monitor
Line Frequency Meter
AC Voltmeter
Voltage Scanner
Temperature Indicator
A.C. Controller for ATM

Single Phase Preventer 1
Single Phase Preventer 2
Frequency Monitoring Relay
Phase Correction Relay
Digital Temperature Indicators /    Controllers
Winding Protection Rrelay
Phase Selector Relay
Earth Fault Relay
VAF Meters
RPM / Frequency Indicator
AC Ammeter
Three Phase / Single Phase Voltage    Monitor
Process Indicator
Humidity Indicator
Fire Protection Panel
 
 
 
 
   
 
Cell Site Controler :
Air conditioning systems are vitally needed by Cell sites. The heart of an Air conditioner is its compressor hence some protection means must be provided to the compressor to protect it from abnormal conditions such as over voltage, under voltage, Over Loading, etc. The efficiency of an Air conditioner depends on its Compressor. The compressor cause problems due unhealthy conditions such as Over voltage, Under voltage etc. & frequent start/stop without prior time delay for pressure equalization. To take care of A/C from such electrical hazards ‘PROTON ELECTRONICS’ has developed a new innovative product “CELL SITE CONTROLLER.” CELL SITE Controller is a Microprocessor based system which controls operation of two A/Cs & also protect them from electrical hazards. It also indicates respective faults by LEDs on front panel. System also provides facility to indicate High temperature Alarm. All the set points such as Voltage, Current, and Temperature are site selectable & user can easily set them by using keys provided on the front panel.
Cell Site Controler
 
 
 
Salient Features :-
1. Controls/ protects two Air conditioners.
2. Protection against Over voltage, Under Voltage, Over Load, Underload , with Alarm indication.
3. 3 Digit LED display to view Temperature, Voltage, Current & Set points.
4. Separate Room temperature high Alarm indication . (above 35°C )
5. Over voltage, under voltage, Over current, Temperature set point user setable.
6. Changeover Cycle time in minutes user setable.
7. Automatic changeover between two ACs if fault occurs to running AC.
8. Low power consumption.
9. Separate potential free contacts for ‘AC Fault Alarm’ & ‘High temperature Alarm’
10. AC ON indication by LED on front panel.11. Power fail Alarm potential free relay O/P.