The AC Power Monitor is a solid state Power Meter. Monitoring of three phase AC supply including all type of energies. The AC Power Monitor is based on Microcontroller, with a high degree of programmability.
The Meter has been programmed to operate as an intelligent front end measuring and storing device & serial port connectivity qualifies model AC Power Meter.
The Meter’s supplied preprogrammed for operation and can be directly installed. The Meter can be read manually or through a RTU using RS-485 MODBUS.
Auxiliary Power :-
No External power is required (Draws power from the voltage signal Inputs)
System :-
3 phase 4 wire unbalanced load.
Features:-
1] LCD Display (2X16 Char) with Back Light.
2] Calibration: using front keys.
3] Digital Input & Output.
4] Isolated RS 485 (MODBUS-RTU Protocol).
5] Fully User Programmable.
6] Fault log History & Fault Reset facility.
7] Every Menu Settings are Password Protected.
Measured Parameters :-
1] Voltage (Ph – N& Ph – Ph RMS)
2] Unbalance Voltage measured (Ph– Ph Unbalance measured.)
